Tym Tractor Fuel Filter And Housing?

Single Image

Before diving in to maintenance work, brand sure to complete your daily maintenance items. This includes checking that any recent fixes to your tractor are in identify, lights are working, tires are up to pressure and rotating parts are tightened.

Once you lot've reviewed all these items and your daily maintenance checklist, ensure attachments and implements are lowered or detached.

The engine must be turned off and cool. Remember, hot components and liquids tin can cause serious burns. Get industrial-form, lidded bins to collect waste liquids. Preferably, employ i that y'all can send to a recycling facility for responsible disposal.

Now, put on rubber gear, take a await under the hood and put the hood support in place.

Coolant
Locate and open the radiator cap. If the coolant level is non upward to the filter inlet, add more than coolant.

To alter your coolant, locate the drain erect and open it along with the radiator cap for faster draining. Launder the within of the radiator thoroughly with clean water. Then, fit the radiator cock to add the coolant to the prescribed level. Finally, start the engine and idle for five minutes. Plow the engine off and when the engine is absurd, top off the coolant equally needed. If you have cold winters, make sure to add together anti-freeze in the coolant tank. This is of import to avoid the coolant freezing and damaging the engine.

Safety tips:

If you lot come across a clogged radiator screen, brand sure to clean it to prevent the engine from overheating.
In instance coolant gets on your skin, affluent the area with cool water and make clean thoroughly with soap.

Two Image

Engine
First, determine the engine oil level. Pull out the dipstick and wipe information technology clean to remove rest oil. Insert it and take it out over again. Check if the mark falls betwixt the minimum and maximum line, and add together as necessary.

To change your oil, locate and unscrew the drain plug. Make certain the oil is drained thoroughly, especially if your replacement oil is from a dissimilar manufacturer, or has a different viscosity. Tighten the drain plug back into place. Finally, utilize the filler pigsty to carefully add engine oil to the correct level.
Rubber tips:

Keep a prophylactic distance while draining oil. Hot oil volition drain starting time.
In example oil gets on your peel, flush the area with cool water and clean thoroughly with soap.

Manual fluid
Use the sight drinking glass to determine the transmission fluid level through the sight drinking glass. If insufficient, add fluid till the indicator is between the upper and lower limits.

In case the fluid has get contaminated, you should change the oil. Showtime by unscrewing the drain plug. Once all the fluid has tuckered, tighten the plug back in identify. Then add the specified amount of transmission fluid through the filler pigsty. If yous are changing the brand or type of transmission fluid, make sure the previous oil has drained thoroughly earlier calculation the new i.

Condom tips:

Continue a safe distance while draining transmission fluid. Hot oil will drain get-go.
In example oil gets on your peel, flush the area with cool water and clean thoroughly with soap.

Two Image

Axle oil
Similar to the engine oil, you starting time demand to determine the axle oil using the dipstick. If the oil is insufficient, add oil as needed.

To change the oil, locate and unscrew the bleed plug likewise as the casing on the left and right. Brand sure the oil is drained thoroughly, particularly if your replacement oil is from a unlike manufacturer, or has a different viscosity. Tighten the bleed plug and casings back into identify. Finally, utilise the filler hole to carefully add axle oil to the right level.

Safety tip:

Before starting the engine, cheque the front axle oil. Or cheque within five minutes of stopping the engine. Top upwardly if in that location is a reduction in the oil level and tighten the plugs as needed.
Keep a condom distance while draining the axle oil. Hot oil will drain get-go.
In case oil gets on your skin, flush the expanse with cool h2o and clean thoroughly with lather.

Two Image

Filters and cartridges
Changing filters and cartridges on a routine footing can significantly heighten the working efficiency of your tractor.

Commencement with the HST oil filter, located on undercarriage of your tractor. Turn the oil filter chemical element counterclockwise with a wrench. Accept a new cartridge and utilise a thin picture show of oil to the O-ring. Then tighten it in place by hand. Use a wrench to tighten it further for two to three turns. Finally, add hydraulic oil to the specified level and utilize the dipstick to see if more oil needs to be added.

Next, clean the transmission strainer. Unscrew the filter trunk support commodities from the right lower section of the rear manual instance. Then gently pull the filter out and clean with diesel fuel before putting it back in identify.

To replace the engine oil filter, follow the same steps every bit the HST oil filter. In one case the new filter is in place run the engine for approximately v minutes to ensure the warning low-cal does non active. And so shut off the engine.

Fuel arrangement
Make sure y'all are always using a low sulfur or ultra depression sulfur fuel. Supersede the fuel if you lot find contaminants like grit, sand or h2o to forbid deterioration in performance of the fuel pump. Add together quality fuel through the strainer.

If your engine stops due to lack of fuel, or you remove or replace a filter line, bleed the fuel system to remove whatever trapped air. First locate and unscrew the haemorrhage spiral and kickoff the engine. Once a clean and consistent flow of fuel comes out of the screw, switch off the engine and tighten the screw dorsum in place. Repeat as needed.

Air cleaner
Pull out the valve by mitt and remove the dust from the housing. If the filter is dirty or watery, wipe information technology down with a dry rag before plumbing equipment it back. Make certain you are using an air cleaner that is made for your tractor and that it remains dry and without oil.

Utilize pressurized air to accident out the grit from the filter. Keep the nozzle at a distance from the surface of the filter and accident air from the within, outwards.

If you have cleaned your filter more than five times, or if the filter appears damaged, supplant it with a new one.

Safety tips:

Never operate the tractor without the air cleaner installed
When cleaning, ensure that no elements are existence hit against a hard surface like rock or concrete
Tighten each part of the air cleaner deeply to forestall dust from entering

Two Image

Electric system
Audit, bank check and maintain your unabridged electric system. This includes the bombardment, the wiring, the fuse box, lights and lamps.

Battery
Start by checking your bombardment. If it is corroded or covered with contaminants, the bombardment will non deliver current. Wipe away whatever corrosion with a brush or sandpaper. If you have non used your tractor in over two weeks and the charge indicator shows a red or white color, you will demand to charge your battery.
To charge your battery, make certain the ignition switch is in the off position and remove the battery from the tractor. Follow typical charging process, connecting correctly to positive and negative terminals. Charging should not be too quick and the current should exist below 10 A.

Safety tips:

- - Always accuse your battery in a well ventilated area, as charging produces combustible hydrogen gas. Keep flammable items and spark away from the battery.
  - Get medical attending immediately in case you lot make contact or swallow battery electrolytes. Meanwhile, rinse the affected surface area thoroughly with h2o, or beverage plenty of h2o if swallowed.
Electrical wiring
Wiring in your electrical organisation should exist in identify and in good status to avoid contact failure, damage, deterioration of electrical devices, brusk circuits and even fire.
If wiring sheaths have peeled off, wrap the wiring with insulated plastic tape. If at that place is damage to the fasteners or bands, supplant them using clamps. Accept wirings checked past your workshop once a year regularly to avoid fire.
Fuse box
The tractor fuse box helps prevent any possible accidents in cases of wiring malfunction. In case yous spot any malfunction in electric functions of your tractor, check for a blown fuses.
Commencement, remove the encompass of the fuse box and remove blown fuses. Use a fuse with the same rated chapters, as indicated on the cover of your fuse box.

Safety tip:

- - Never use a fuse with a different capacity as these can pb to overheated wiring and fires. For the same reason, never utilise a steel wire or foil instead of a fuse.
Lights and bulbs
Using the window, see if the fuses for your lamps are blown. If a lamp does non come on past operating the corresponding switch, check the respective fuse. If the fuse is intact, the bulb probable needs to be replaced. Confirm the seedling is blown by looking at the filament. If information technology is blown, replace information technology by using a new seedling of the aforementioned capacity.

Greasing
Greasing is important to keep the moving parts of your tractor in good working condition and improve longevity. Always grease the tractor before working on a wet field to repel h2o droplets and forestall rust. Employ the supplied grease gun and operator'south manual for your tractor to grease all the right points.

In add-on to the general greasing points, make sure to grease the brake arm. First, remove the rubber caps on the floor and dash panel to access the nipple and grease.

Belts, hoses and tires
Ensure you check and conform the tension of your fan belt regularly. Unscrew the alternator mounting bolt slightly and motion the alternator to adjust the tension. Check the tension of the belt with almost 22 pounds of strength. Deviation of about 0~0.six inch is acceptable.

With the engine off and cooled down, bank check the fuel hose, air cleaner hose and radiator hose under the hood. Make certain in that location is no harm or leaks. Tighten the clamps.

Bank check the tire pressure on your tractor and top off to specifications, whether it is turf, agricultural or industrial.

View our table for maintenance based on hour mark.

When to get help from a TYM dealer
Prevent failure and become maintenance done right. Contact your dealer if:

Your tractor is showing a warning alert
The coolant in your engine has frozen
The radiator fin is deformed
Rubber parts similar hoses have been used in over two years
Fans, hoses and belts are damaged or loose
Wheel treading needs to be adjusted, or tires are worn out
Electrical systems and wires have not been professionally inspected for over a year

News on shaping the land effectually you

Read other existent-world stories of solutions and initiatives from TYM. Our experienced teams utilize the latest local insights to solve on-ground challenges in the Us, Great britain, Europe, Asia, Middle Eastward and Africa, Russia, Commonwealth of australia and Oceania.